Linux ETC

ethtool

2008.05.19 20:36

호스트웨이 조회 수:29609

ethtool 명령을 이용하여 랜카드 속도 및 전송 모드 지정하는 방법입니다.

1. 현재 eth0 설정 확인

아래와 같이 현재 eth0 카드의 설정을 확인합니다.

[root@sakang /]# ethtool eth0
Settings for eth0:
       Supported ports: [ TP MII ]
       Supported link modes:   10baseT/Half 10baseT/Full
                               100baseT/Half 100baseT/Full
       Supports auto-negotiation: Yes
       Advertised link modes:  10baseT/Half 10baseT/Full
                               100baseT/Half 100baseT/Full
       Advertised auto-negotiation: Yes
       Speed: 100Mb/s
       Duplex: Full

       Port: MII
       PHYAD: 1
       Transceiver: internal
       Auto-negotiation: on
       Supports Wake-on: pumbg
       Wake-on: d
       Current message level: 0x00000001 (1)
       Link detected: yes


현재 스피드가 100M 이고 전송모드는 Full Duplex  임을 확인할 수 있습니다.



2. 10M 로 변경하기

ethtool -s eth0 speed 10 duplex full autoneg on

위 명령으로 스피드를 10M 변경하고 확인해 봅시다.

[root@sakang /]# ethtool eth0
Settings for eth0:
       Supported ports: [ TP MII ]
       Supported link modes:   10baseT/Half 10baseT/Full
                               100baseT/Half 100baseT/Full
       Supports auto-negotiation: Yes
       Advertised link modes:  10baseT/Full
       Advertised auto-negotiation: Yes
       Speed: 10Mb/s
       Duplex: Full
       Port: MII
       PHYAD: 1
       Transceiver: internal
       Auto-negotiation: on
       Supports Wake-on: pumbg
       Wake-on: d
       Current message level: 0x00000001 (1)
       Link detected: yes

스피드가 10M 로 변경 되었습니다.

3. duplex 변경

아래 명령으로 전송모드를 변경할 수 있습니다.

ethtool -s eth0 speed 10 duplex half autoneg on

eth0 을 확인해 보면

Settings for eth0:
       Supported ports: [ TP MII ]
       Supported link modes:   10baseT/Half 10baseT/Full
                               100baseT/Half 100baseT/Full
       Supports auto-negotiation: Yes
       Advertised link modes:  10baseT/Half
       Advertised auto-negotiation: Yes
       Speed: 10Mb/s
       Duplex: Half

       Port: MII
       PHYAD: 1
       Transceiver: internal
       Auto-negotiation: on
       Supports Wake-on: pumbg
       Wake-on: d
       Current message level: 0x00000001 (1)
       Link detected: yes

전송 모드가 half Duplex 로 변경되었습니다.

이 상태에서 ethtool -s eth0 autoneg off 명령으로 자동협상기능을 끄고

ethtool -s eth0 autoneg on 명령으로 다시 켭니다.

그리고 나서 eth0 카드를 확인해 보면 100M Full Duplex 로 바뀌어져 있습니다.

이유는 eth0 카드와 연결된 스위치의 설정이 100M Full Duplex 이기 때문입니다.



사용 방법이 비슷한 mii-tool 이란 도구도 있으니 한번 사용해 보시기 바랍니다.
번호 제목 글쓴이 날짜 조회 수
26 tcpdump 기본 사용 sylee 2008.07.02 39640
25 VSFTP 에서 사용하는 port를 변경하기 호스트웨이 2012.03.23 39687
24 특정 계정만 su 명령어 사용 file 호스트웨이 2012.05.05 39702
23 openssl 간단 사용법 호스트웨이 2008.12.10 41111
22 리눅스 Sleep 명령어 file 호스트웨이 2012.08.10 42138
21 터미널 창으로 메시지 보내기 호스트웨이 2008.05.19 44191
20 ssh-key를 생성하여 서버에 패스워드 없이 접속하는 방법 jook 2008.06.25 44751
19 Kernel Parameters HOSTWAY 2008.06.04 45455
18 /bin/false, /sbin/nologin 의 차이점 호스트웨이 2012.08.10 45638
17 시스템 시간 확인 및 동기화 하기 sylee 2008.05.15 46973
16 history 조회시 '날짜,시간' 표시하기 호스트웨이 2012.03.16 49290
15 xinetd 소개 및 설정 호스트웨이 2012.06.29 51903
14 top 명령어 및 옵션 설명 file 호스트웨이 2012.03.27 52528
13 강제 umount 방법 (umount : device is busy 발생시) 호스트웨이 2012.11.30 55424
12 fdisk 명령어를 이용하여 수동으로 파티션 나누기 file 호스트웨이 2015.11.30 57674
11 서비스 이름으로 포트 번호 확인하기 호스트웨이 2012.04.13 57714
10 비대해진 로그 파일 내용을 비우는 방법 - /dev/null 호스트웨이 2012.03.16 61402
9 head 와 tail 사용하기 sylee 2008.05.14 63472
8 국가명 약어 (국가코드) 호스트웨이 2012.04.13 64960
7 Swap 메모리 늘리기 file 호스트웨이 2012.03.30 67200